ISO 6162-2:2002 液压液体能量-带有裂片或一件凸缘夹具和米制或英制螺丝的凸缘连接器-第2部分：压力35MPa至40MPa,DN13至DN 51

标准编号：ISO 6162-2:2002

中文名称：液压液体能量-带有裂片或一件凸缘夹具和米制或英制螺丝的凸缘连接器-第2部分：压力35MPa至40MPa,DN13至DN 51

英文名称：Hydraulic fluid power — Flange connectors with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 1

发布日期：2002-12

标准范围

ISO 6162-2:2002规定了适用于在35 MPa（350巴）至40 MPa（400巴）压力下使用的四螺钉、分体式和分体式法兰卡箍式管和软管连接器的法兰头、分体式法兰卡箍（FCS）、一体式法兰卡箍（FC）和端口的完整通用和尺寸特征。它还规定了要使用的密封件的尺寸，以及容纳密封件的凹槽。ISO 6162-2:2002还认识到需要容纳公制螺钉紧固件，以及提供使用现有英制螺钉紧固件的方法。

ISO 6162-2:2002 specifies complete general and dimensional characteristics for flange heads, split flange clamps (FCS), one-piece flange clamps (FC) and ports applicable to four-screw, split and one-piece flange clamp type tube and hose connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar). It also specifies the dimensions of the seals to be used, as well as the grooves to house the seal.ISO 6162-2:2002 also recognizes the need to accommodate metric screw fasteners, as well as to provide a means to use existing inch screw fasteners.

标准预览图