ISO 16010:2005 人造弹性密封件 运输气体燃料和碳氢化合物流体的管和配件所用密封件的材料要求

标准编号：ISO 16010:2005

中文名称：人造弹性密封件 运输气体燃料和碳氢化合物流体的管和配件所用密封件的材料要求

英文名称：Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids

发布日期：2005-07

标准范围

ISO 16010:2005规定了在一般工作温度为-5°C至50°C，在特殊情况下为-15°C至50°C的供应管道和配件、辅助设备和阀门密封件中使用的弹性体材料的要求:a)一般应用:气体燃料[气相中的人造、天然和液化石油气(LPG)]、芳烃含量高达30%(按体积计)的烃流体，包括液相中的LPG；b)特殊应用:适用于运载含有气体冷凝物和芳烃含量不受限制的烃流体的气体燃料的材料。还给出了成品接头密封的一般要求。本国际标准适用于所有管道材料的接头密封，包括铁、钢、铜和塑料。不适用于下列情形:由多孔材料制成的密封件；将封闭空隙作为其设计的一部分的密封件；需要耐火焰或耐热应力的密封件；包含连接预硫化型材端部的接头的密封件。

ISO 16010:2005 specifies requirements for elastomeric materials used in seals for supply pipes and fittings, ancillaries and valves at operating temperatures in general from -5 °C up to 50 °C and in special cases from -15 °C up to 50 °C, for the following:a) general applications:

• gaseous fuel [manufactured, natural and liquefied petroleum gas (LPG) in the gaseous phase],
• hydrocarbon fluids with an aromatic content up to 30 % (by volume), including LPG in the liquid phase;

b) special applications:

• materials suitable for carrying gaseous fuels containing gas condensates and hydrocarbon fluids of unrestricted aromatic content.

General requirements for finished joint seals are also given.This International Standard is applicable to joint seals for all pipeline materials, including iron, steel, copper and plastics.It is not applicable to the following:

• seals made from cellular materials;
• seals with enclosed voids as part of their design;
• seals required to be resistant to flame or to thermal stress;
• seals which contain splices joining pre-vulcanized profile ends.

标准预览图