ISO/TS 15011-5:2006 焊接及相关处理的卫生和安全-烟气取样的试验室方法－第5部：整体或部分由有机材料构成制品的焊接或切割产的热劣化生成物认定

标准编号：ISO/TS 15011-5:2006

中文名称：焊接及相关处理的卫生和安全-烟气取样的试验室方法－第5部：整体或部分由有机材料构成制品的焊接或切割产的热劣化生成物认定

英文名称：Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 5: Identification of thermal-degradation products generated when welding or cutting through pro

发布日期：2006-03

标准范围

ISO/TS 15011-5:2006规定了获取焊接、切割、预热和矫直产品时产生的热降解产物信息的程序，这些产品全部或部分由有机物质组成，例如车间底漆、油漆、粘合剂、蜡、密封剂、冲压润滑剂、油等。该程序主要针对执行此类程序的试验实验室。所生成的数据可供产品制造商用于提供安全数据表中包含的信息，也可供职业卫生学家用于识别在风险评估和/或工作场所暴露测量中具有重要意义的热降解产品。这些数据不能直接用于估计工作场所暴露。ISO/TS 15011-5:2006适用于所有部分或全部由有机材料组成的产品，这些材料在焊接和切割过程中可能会被加热到产生热降解产物的温度，并且这些降解产物将是什么并不明显。

ISO/TS 15011-5:2006 specifies procedures for obtaining information about thermal degradation products generated when welding, cutting through, preheating and straightening products composed wholly or partly of organic substances, e.g. shop primers, paints, adhesives, waxes, sealants, pressing lubricant, oils, etc. It is aimed primarily at test laboratories performing such procedures. The data generated may be used by product manufacturers to provide information for inclusion in safety data sheets and by occupational hygienists to identify thermal degradation products of significance in the performance of risk assessments and/or workplace exposure measurements. The data cannot be used to estimate workplace exposure directly.ISO/TS 15011-5:2006 is applicable to all products composed partly or wholly of organic materials that could be heated, during welding and cutting, to temperatures at which thermal degradation products are generated and where it is not apparent what those degradation products will be.

标准预览图