ISO 3601-2:2008 液压驱动系统 O形圈 第2部分：一般用途的外壳尺寸
标准编号：ISO 3601-2:2008
中文名称：液压驱动系统 O形圈 第2部分：一般用途的外壳尺寸
英文名称：Fluid power systems — O-rings — Part 2: Housing dimensions for general applications
发布日期：2008-06
标准范围
ISO 3601-2:20 08规定了符合ISO 3601-1的一般工业应用的A级O形圈的外壳（压盖）尺寸，以及用于选定公制尺寸硬件（例如流体动力缸孔和活塞杆）上的B级O形圈的外壳尺寸。这些O形圈用于一般液压和气动应用，不带或带防挤压环（支撑环）。O形圈的尺寸（d1和d2）、尺寸代码（SC）和公差符合ISO 3601-1。ISO 3601-2:20 08给出了ISO 3601-1中规定的用于航空航天应用的O形圈的外壳尺寸。
ISO 3601-2:2008 specifies the housing (gland) dimensions for class A O-rings for general industrial applications conforming to ISO 3601-1, as well as housing dimensions for class B O-rings used on selected metric-dimensioned hardware, e.g. fluid power cylinder bores and piston rods. These O-rings are for use in general hydraulic and pneumatic applications without and with anti-extrusion rings (back-up rings). The dimensions of the O-rings (d1 and d2), size codes (SC) and tolerances conform to ISO 3601-1.ISO 3601-2:2008 gives the housing dimensions for the O-rings intended for aerospace applications that are specified in ISO 3601-1.
标准预览图
