ISO 666:2006 机床 轮毂式法兰平面磨轮的安装

标准编号：ISO 666:2006

中文名称：机床 轮毂式法兰平面磨轮的安装

英文名称：Machine tools — Mounting of grinding wheels by means of hub flanges

发布日期：2006-05

标准范围

ISO 666:2006根据ISO 603-1、ISO 603-2、ISO 603-4、ISO 603-6、ISO 603-7和ISO 603-8规定了普通砂轮轮毂法兰的基本要求，尤其是尺寸，孔径与外径之比大于0.2。根据ISO 603的这些部分，它也适用于具有与砂轮直径相同的陶瓷或金属型芯的超级磨料，与型芯材料无关。它适用于圆周速度高达50 m/s，砂轮轴驱动功率高达30 kW的砂轮。不适用于切割用安装装置-脱离车轮。

ISO 666:2006 specifies the essential requirements, especially dimensions, for hub flanges for plain grinding wheels according to ISO 603-1, ISO 603-2, ISO 603-4, ISO 603-6, ISO 603-7 and ISO 603-8 with a ratio of the bore diameter to the outside diameter greater than 0,2. It is also applicable for super abrasives with vitrified or metal core having the same diameters as the grinding wheels according to those parts of ISO 603, independently from the material of the core. It applies to grinding wheels with peripheral speeds up to 50 m/s and driving powers of the wheel spindle up to 30 kW. It is not applicable to mounting devices for cutting-off wheels.

标准预览图