ISO 11119-2:2012 气瓶 可重复充装的复合材料气瓶和管道 设计、制造和测试 第2部分：带均分负载金属内衬的450 l以下完全缠绕纤维增强复合材料气瓶和管道

标准编号：ISO 11119-2:2012

中文名称：气瓶 可重复充装的复合材料气瓶和管道 设计、制造和测试 第2部分：带均分负载金属内衬的450 l以下完全缠绕纤维增强复合材料气瓶和管道

英文名称：Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing

发布日期：2012-07

标准范围

ISO 11119-2:2012规定了用于储存和运输压缩或液化气体的水容量在0.5 l和450 l之间的复合气瓶和管道的要求。ISO 11119-2:2012适用于第3类完全包裹的圆筒或管子，圆筒部分和圆顶端部均带有均载金属衬套和复合加强件。ISO 11119-2:2012仅适用于基体中碳纤维、芳纶纤维或玻璃纤维（或其混合物）复合增强的圆柱体和管材。符合ISO 11119-2:2012的气瓶的最低设计寿命为15年。ISO 11119-2:2012未涉及可拆卸保护套的设计、安装和性能。ISO 11119-2:2012不适用于带焊接衬套的气缸。

ISO 11119-2:2012 specifies requirements for composite gas cylinders and tubes between 0,5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.ISO 11119-2:2012 applies to type 3 fully wrapped cylinders or tubes with a load-sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends.ISO 11119-2:2012 is limited to cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix.Cylinders complying with ISO 11119-2:2012 have a minimum design life of 15 years.ISO 11119-2:2012 does not address the design, fitting, and performance of removable protective sleeves.ISO 11119-2:2012 does not apply to cylinders with welded liners.

标准预览图