ISO 23551-1:2006 气体燃烧器和燃气设备用安全和控制装置.特殊要求.第1部分：自动阀门

标准编号：ISO 23551-1:2006

中文名称：气体燃烧器和燃气设备用安全和控制装置.特殊要求.第1部分：自动阀门

英文名称：Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 1: Automatic valves

发布日期：2006-07

标准范围

ISO 23551-1:2006规定了燃气燃烧器、燃气用具和类似用途的自动阀（以下简称阀门）的安全、结构和性能要求及测试。ISO 23551-1:2006仅涵盖型式试验。ISO 23551-1:2006适用于申报最大工作压力不超过500 kPa的阀门，用于燃烧器或将燃气用作天然气、工业气体或液化石油气（LPG）的装置。ISO 23551-1:20061适用于直接或间接电动或机械操作的阀门。ISO 23551-1:2006适用于气动、液压等流体驱动的阀门。ISO 23551-1:2006适用于流量由外部电信号控制的阀门，可以是离散的步骤，也可以是与应用的信号成比例的。ISO 23551-1:2006适用于装有关闭位置指示器开关的阀门。

ISO 23551-1:2006 specifies safety, constructional and performance requirements and testing of automatic valves (hereafter referred to as valves) for gas burners, gas appliances and similar use.ISO 23551-1:2006 covers type testing only.ISO 23551-1:2006 applies to valves with declared maximum working pressures up to and including 500 kPa, for use on burners or in appliances using fuel gases as natural gas, manufactured gas or liquefied petroleum gas (LPG).ISO 23551-1:20061 applies to valves directly or indirectly operated electrically or by mechanical means.ISO 23551-1:2006 applies to valves actuated by fluids e.g. pneumatic, hydraulic.ISO 23551-1:2006 applies to valves where the flow rate is controlled by external electrical signals, either in discrete steps or proportional to the applied signal.ISO 23551-1:2006 applies to valves fitted with closed position indicator switches.

标准预览图