ISO 25119-2:2019 农林用拖拉机和机械 控制系统的安全相关部件 第2部分：概念设计阶段

标准编号：ISO 25119-2:2019

中文名称：农林用拖拉机和机械 控制系统的安全相关部件 第2部分：概念设计阶段

英文名称：Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 2: Concept phase

发布日期：2019-08

标准范围

本文件规定了农业和林业用拖拉机、自走式机器以及农业用安装式、半安装式和牵引式机器上控制系统安全相关部件（SRP/CS）开发的概念阶段。它还可以应用于移动市政设备（如街道清扫机）。本文件不适用于:-农业用飞机和气垫车；-草坪和花园设备。本文件规定了SRP/CS执行其安全所需的特征和类别-相关功能。它不确定特定应用程序的性能级别。注1机器特定的C类标准可规定其范围内机器安全相关功能的性能等级（AgPL）。否则，AgPL的规格由制造商负责。本文件适用于电气/电子/可编程电子系统（E/E/PES）的安全相关部件，因为这些部件与机电系统相关。它涵盖了E/E/PES安全故障行为可能造成的危险-相关系统，包括这些系统的交互。它不涉及与电击、火灾、烟雾、热、辐射、毒性、易燃性、反应性、腐蚀、能量释放和类似危险相关的危险。，除非直接由E/E/PES安全相关系统的故障行为引起。它还包括E/E/PES安全相关系统的故障行为，涉及保护措施、保障措施或安全相关功能，以应对非E/E/PES危害。本文件范围内包括的示例:-SRP/CS限制混合动力车中的电流，以防止绝缘故障/电击危险；-对SRP/CS的电磁干扰；-SRP/CS设计用于防火。本文件范围内未包括的示例:-由于摩擦导致的绝缘失效，从而导致触电危险；-影响附近机器控制系统的标称电磁辐射；-腐蚀导致电缆过热。本文件不适用于非E/E/PES系统（如液压、机械或气动）。注2:有关机械安全的设计原则，请参见ISO 12100。本文件不适用于发布日期之前制造的控制系统的安全相关部件。

This document specifies the concept phase of the development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to mobile municipal equipment (such as street-sweeping machines).This document is not applicable to:— aircraft and air-cushion vehicles used in agriculture;— lawn and garden equipment.This document specifies the characteristics and categories required of SRP/CS for carrying out their safety-related functions. It does not identify performance levels for specific applications.NOTE 1 Machine specific type-C standards can specify performance levels (AgPL) for safety-related functions in machines within their scope. Otherwise, the specification of AgPL is the responsibility of the manufacturer.This document is applicable to the safety-related parts of electrical/electronic/programmable electronic systems (E/E/PES), as these relate to mechatronic systems. It covers the possible hazards caused by malfunctioning behaviour of E/E/PES safety-related systems, including interaction of these systems. It does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, release of energy, and similar hazards., unless directly caused by malfunctioning behaviour of E/E/PES safety-related systems. It also covers malfunctioning behaviour of E/E/PES safety-related systems involved in protection measures, safeguards, or safety-related functions in response to non-E/E/PES hazards.Examples included within the scope of this document:— SRP/CS's limiting current flow in electric hybrids to prevent insulation failure/shock hazards;— electromagnetic interference with the SRP/CS;— SRP/CS's designed to prevent fire.Examples not included within the scope of this document:— insulation failure due to friction that leads to electric shock hazards;— nominal electromagnetic radiation impacting nearby machine control systems;— corrosion causing electric cables to overheat.This document is not applicable to non-E/E/PES systems (such as hydraulic, mechanic or pneumatic).NOTE 2 See also ISO 12100 for design principles related to the safety of machinery.This document is not applicable to safety-related parts of control systems manufactured before the date of its publication.

标准预览图