ISO 29863:2018 自粘带 静态剪切粘附的测量
标准编号：ISO 29863:2018
中文名称：自粘带 静态剪切粘附的测量
英文名称：Self adhesive tapes — Measurement of static shear adhesion
发布日期：2018-05
标准范围
该文件规定了一系列用于确定压敏胶带在平行于胶带和基材表面施加的恒定载荷下保持粘附的能力的方法。本文件包含:-方法A:自粘带？对垂直标准钢板的剪切粘附力的测量；-方法B:自粘带？测量对覆盖有NIST SRM 1810A[1]标准纤维板的垂直面板的剪切粘附力；-方法C:自粘带？测量与由买方和卖方商定的纤维板覆盖的垂直面板的剪切粘附力；-方法D:自粘带？应用于水平标准钢板的长丝增强带的剪切粘附力的测量；-方法E:自粘带？应用于覆盖有NIST SRM 1810A1)标准纤维板的水平面板的长丝增强带的剪切粘附力的测量；-方法F:自粘带？测量应用于由买卖双方商定的覆盖有纤维板的水平面板的长丝增强胶带的剪切粘附力；-方法G:自粘带？在10分钟停留时间后，在高温下测量与垂直标准钢板的剪切粘附力。[1]NIST SRM 1810A是国家标准与技术研究所？标准参考材料1810A，可从美国马里兰州盖瑟斯堡研究所获得。
This document specifies a series of methods for the determination of the ability of a pressure sensitive tape to remain adhered under a constant load applied parallel to the surfaces of the tape and substrate.This document contains:— method A: Self adhesive tapes?Measurement of shear adhesion to a vertical standard steel panel;— method B: Self adhesive tapes?Measurement of shear adhesion to a vertical panel covered with NIST SRM 1810A[1] standard fibreboard;— method C: Self adhesive tapes?Measurement of shear adhesion to a vertical panel covered with a fibreboard agreed upon by the buyer and seller;— method D: Self adhesive tapes?Measurement of shear adhesion of filament reinforced tape applied to a horizontal standard steel panel;— method E: Self adhesive tapes?Measurement of shear adhesion of filament reinforced tape applied to a horizontal panel covered with NIST SRM 1810A1) standard fibreboard;— method F: Self adhesive tapes?Measurement of shear adhesion of filament reinforced tape applied to a horizontal panel covered with a fibreboard agreed upon by the buyer and seller;— method G: Self adhesive tapes?Measurement of shear adhesion to a vertical standard steel panel at elevated temperature after a 10 min dwell time.[1] NIST SRM 1810A is National Institute of Standards and Technology?Standard Reference Material 1810A and is available from the Institute at Gaithersburg, Maryland MD 20899, USA.
标准预览图
