ISO 19085-6:2024 木工机械 安全 第6部分：单轴立式成型机

标准编号：ISO 19085-6:2024

中文名称：木工机械 安全 第6部分：单轴立式成型机

英文名称：Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines (toupie)

发布日期：2024-04

标准范围

本文件规定了能够连续生产使用的单轴立式成型机（定义见3.1）的安全要求和措施，以下也称为“机器”。这些机器设计用于切割实木和物理特性与木材相似的材料。本文件涉及附件中列出的所有重大危害、危害情况和事件？a，当机器按预期操作、调整和维护时，在制造商预见的条件下，包括合理可预见的误用，与机器相关。运输、组装、拆卸、禁用和报废阶段也被考虑在内。本文件也适用于装有下列一个或多个设备/附加工作单元的机器，其危害已得到处理:A）？垂直调节心轴的装置；b）？使心轴倾斜的装置；c）？用于装配手动操作的开榫滑动台的装置；d）？玻璃珠锯单元；e）？可调工作台插件；(f)？用于改变主轴的旋转方向的装置；(g)？用于将柄安装工具固定在心轴上的装置；(h)？可互换心轴；i)？快速换刀/换刀轴系统；j）？可拆卸电源单元；k）？支持可拆卸的电源单元，可进行电动调节。本文件不适用于—？装有外侧轴承的机器，—？配备前延伸台和/或开榫滑动台动力运动的机器。本文件不适用于预期在潜在爆炸性环境中使用的机器或在其发布日期之前制造的机器。

This document specifies the safety requirements and measures for single spindle vertical moulding machines (defined in 3.1), capable of continuous production use and hereinafter referred to also as “machines”.

The machines are designed to cut solid wood and material with similar physical characteristics to wood.

This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to the machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.

This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:

a)       device to adjust the arbor vertically;

b)       device to tilt the arbor;

c)        device to fit a manually operated tenoning sliding table;

d)       glass bead saw unit;

e)       adjustable table insert;

f)         device for changing the direction of rotation of the spindle;

g)       device for fixing shank mounted tools on the arbor;

h)       interchangeable arbor;

i)         quick tool/arbor change system;

j)         demountable power feed unit;

k)       support for the demountable power feed unit with power-driven adjustments.

This document does not apply to

—     machines equipped with outboard bearings,

—     machines equipped with powered movements of a front extension table and/or a tenoning sliding table.

This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.

标准预览图