ISO 12164-6:2023 带有法兰接触面的空心圆锥接口 第6部分：AS、CS和ES型空心锥柄用AS、CS、ES型安装孔

标准编号：ISO 12164-6:2023

中文名称：带有法兰接触面的空心圆锥接口 第6部分：AS、CS和ES型空心锥柄用AS、CS、ES型安装孔

英文名称：Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES

发布日期：2023-10

标准范围

本文件根据ISO 12164-5规定了适用于机床（例如车床、钻孔、铣削和磨床）的空心锥形柄（HSK）的锥形和法兰接触面接收器的尺寸。本文档规定了三种类型的接收器:-自动换刀类型AS；-CS型仅用于手动换刀，经由接收器和刀柄两者中的径向孔；-键入ES进行自动换刀。注1 AS、CS和ES型接收器适合AS、CS和ES型HSK柄（根据ISO 12164-5）。注2 AS和ES型HSK柄也可以手动更换。

This document specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks (HSK) in accordance with ISO 12164-5 to be applied to machine tools (e.g. machines for turning, drilling, milling and grinding).

This document specifies three types of receivers:

—     type AS for automatic tool change;

—     type CS for manual tool change only, via radial holes in both the receiver and the tool shank;

—     type ES for automatic tool change.

NOTE 1        The receivers of types AS, CS and ES fit the HSK shanks of types AS, CS and ES (according to ISO 12164-5).

NOTE 2        HSK shanks of types AS and ES can also be changed manually.

标准预览图