ISO 10360-5:2010 产品几何量技术规范（GPS） 坐标测量机（CMM）的验收和复检试验 第5部分：使用多触针探测系统的坐标测量机

标准编号：ISO 10360-5:2010

中文名称：产品几何量技术规范（GPS） 坐标测量机（CMM）的验收和复检试验 第5部分：使用多触针探测系统的坐标测量机

英文名称：Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems

发布日期：2010-09

标准范围

ISO 10360-5:2010规定了接触式探测系统对CMM性能的验收和定期再验证试验，仅适用于使用任何类型的接触式探测系统、离散点探测模式和球形或半球形触针的CMM。它补充了ISO 10360-7和ISO 10360-2，前者是带有视频探测系统的坐标测量机模块，后者是通用的，即不针对探头类型。ISO 10360-5:2010适用于配备以下任何一项的坐标测量机:单触针探测系统；多针探测系统，带有固定的多个探针（例如。g、 “星型”触笔；多个探测系统，比如每个探测器都有一个触针；具有清晰探测的系统；触针和探针更换系统；手动（非驱动）坐标测量机。ISO 10360-5:2010不适用于需要不同测试程序的非接触式探测系统。

ISO 10360-5:2010 specifies acceptance and periodic reverification tests of CMM performance with contacting probing systems and is only applicable to CMMs using any type of contacting probing system, a discrete point probing mode, and spherical or hemispherical stylus tip(s).It complements ISO 10360-7, which is the module for CMMs with video probing systems, and ISO 10360-2, which is universal, i.e. not probe-type specific.ISO 10360-5:2010 applies to CMMs supplied with any of the following: single-stylus probing system; multi-stylus probing systems with fixed multiple styli attached to a single probe (e.g. “star” stylus); multiple probing systems such as those with a stylus for each of their probes; systems with articulating probing; stylus and probe changing systems; manual (non-driven) CMMs.ISO 10360-5:2010 is not applicable to non-contacting probing systems, which require different testing procedures.

标准预览图