ISO/TS 17263:2003 自动车辆和设备鉴定-联合运输货物-系统参数
标准编号：ISO/TS 17263:2003
中文名称：自动车辆和设备鉴定-联合运输货物-系统参数
英文名称：Automatic vehicle and equipment identification — Intermodal goods transport — System parameters
发布日期：2003-06
标准范围
ISO/TS 17263:2003建立了基于射频技术的AEI系统。该系统旨在用于RTTTT/TICS的一般应用。它允许将识别码和关于多式联运中使用的设备和车辆的进一步信息转移到与多式联运过程相关的RTTT/TICS和信息系统中。在RTTT/TICS部门的多式联运背景下，AEI系统的具体目标是实现对多式联运中使用的ITU或相关设备或车辆或物品的明确识别，并自动进行该识别。车辆将在联运方面作为“联运设备”进行考虑和处理。因此，根据ISO/TS 17263的目的，AEI和AVI系统之间的区别:2003不是必需的。ISO/TS 17263:2003专门针对DSRC型空中接口。该要求和测试方法可能不适用于使用远程通信（如蜂窝网络或卫星）或邻近通信（如电感耦合天线）的联运AEI系统。跨空中接口的互操作性（参考点增量）超出了ISO/TS 17263:2003的范围。ISO/TS 17263:2003的目的是定义、描述和指定与联运AEI系统相关的系统参数，以提供一个使能标准，该标准在允许系统说明符确定性能水平和操作条件的同时，为互操作性提供了一个框架。因此，ISO/TS 17263:2003规定:识别系统本身的参数和要求；确保AEI系统在国际运输处理中一致和可靠运行所必需的性能标准；安装在联运设备上的电子设备（标签）的性能和位置要求；阅读器的安装要求，以及与这些组件相关的性能数据。
ISO/TS 17263:2003 establishes an AEI-System based on radio frequency technologies. This system is intended for general application in RTTT/TICS. It allows for the transfer of the identification codes and further information about equipment and vehicles used in intermodal transport into such RTTT/TICS and information systems related to Intermodal Transport processes. Within the intermodal context of the RTTT/TICS Sector, AEI systems have the specific objective of achieving an unambiguous identification of an ITU or related equipment or vehicle or item used in intermodal transport, and to make that identification automatically. Vehicles will be considered and handled under Intermodal aspects as "Intermodal Equipment". Therefore a differentiation between AEI and AVI systems under the purpose of ISO/TS 17263:2003 is not required.ISO/TS 17263:2003 is specifically aimed at DSRC-type air interfaces. The requirement and test methods may not apply for Intermodal AEI systems using long range communications such as Cellular Networks or Satellite, or vicinity communication such as inductively coupled antennas. The interoperability across the air interface (reference point Delta) is outside the scope of ISO/TS 17263:2003.The aim of ISO/TS 17263:2003 is to define, describe and specify the System Parameters related to an intermodal AEI system to provide an enabling Standard, which, whilst allowing the system specifier to determine the performance levels and operating conditions, provides a framework for interoperability. Therefore ISO/TS 17263:2003 specifies:
- parameters and requirements of the identification system itself;
- performance criteria necessary to ensure consistent and reliable operation of AEI systems within international transport processing;
- requirements of the performance and the position of the electronic devices (tag) when installed on intermodal equipment;
- requirements for the installation of readers, and performance data related to these components.
标准预览图
