ISO 14922-2:1999 热喷涂-热喷涂构件的质量要求-第二部分：综合质量要求.

标准编号：ISO 14922-2:1999

中文名称：热喷涂-热喷涂构件的质量要求-第二部分：综合质量要求.

英文名称：Thermal spraying — Quality requirements of thermally sprayed structures — Part 2: Comprehensive quality requirements

发布日期：1999-07

标准范围

本标准规定了以下要求:? 它与热喷涂结构的类型无关。? 它定义了车间和现场热喷涂的质量要求。? 它为描述制造商生产热喷涂结构的能力提供了指导符合规定的要求。? 它也可以作为评估制造商热喷涂能力的依据。本标准适用于证明制造商生产热喷涂涂料的能力以下一项或多项规定了满足规定质量要求的施工:? 当事人之间的合同；? 应用标准；? 监管要求。本标准中包含的要求可全部采用，也可由业主有选择地删除制造商，如果不适用于相关施工。它们提供了一个灵活的框架来控制在以下情况下进行热喷涂:? 案例1在要求制造商具备质量保证的合同中，提供热喷涂的具体要求系统符合EN ISO 9001或EN ISO 9002。? 案例2在要求制造商具备质量保证的合同中，提供热喷涂的具体要求EN ISO 9001或EN ISO 9002以外的系统。? 案例3在合同中提供热喷涂的具体要求，要求制造商制定质量体系。? 案例4在使用热喷涂作为一部分的应用标准中，提供热喷涂的具体要求其要求或相关方之间的合同。然而，它可能更适合于在这种情况下使用EN ISO 14922-3或EN ISO 14922-4。

This standard specifies requirements so that:? It is independent of the type of the thermally sprayed structure.? It defines quality requirements for thermal spraying both in workshops and on site.? It provides guidance for describing a manufacturer's capability to produce thermally sprayed constructions tomeet specified requirements.? It may also be used as a basis for assessing the manufacturer in respect to his thermal spraying capability.This standard is appropriate when demonstration of a manufacturer's capability to produce thermally sprayedconstruction, fulfilling specified quality requirements, are specified in one or more of the following:? a contract between involved parties;? an application standard;? a regulatory requirement.The requirements contained within this standard may be adopted in full or may be selectively deleted by themanufacturer if not applicable to the construction concerned. They provide a flexible framework for the control ofthermal spraying in the following cases:? Case 1To provide specific requirements for thermal spraying in contracts which require the manufacturer to have a qualitysystem in accordance with EN ISO 9001 or EN ISO 9002.? Case 2To provide specific requirements for thermal spraying in contracts which require the manufacturer to have a qualitysystem other than EN ISO 9001 or EN ISO 9002.? Case 3To provide specific requirements for thermal spraying in contracts which require the manufacturer developing aquality system.? Case 4To provide specific requirements for thermal spraying in application standards which uses thermal spraying as partof its requirements or in a contract between relevant parties. It may however be more appropriate forEN ISO 14922-3 or EN ISO 14922-4 to be used in such cases.

标准预览图