ISO 11127-5:1993 涂料和有关产品使用前的钢衬底的制备-非金属喷砂清理磨料的试验方法-第5部分：湿度的测定

标准编号：ISO 11127-5:1993

中文名称：涂料和有关产品使用前的钢衬底的制备-非金属喷砂清理磨料的试验方法-第5部分：湿度的测定

英文名称：Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Determination of moisture

发布日期：1993-12

标准范围

该程序包括称取约100 g的试验部分至容器中，将容器连同试验部分一起放置在先前调节至110°C的烘箱中，放置至少1 h，将容器转移至干燥器中，冷却至室温，用干燥的试验部分重新称量容器，测定干燥试验部分的质量。附录A给出了非金属喷砂清理磨料ISO 11126和ISO 11127的国际标准系列信息。

The procedure includes weighing a test portion of approximately 100 g into a container, placing the container with the test portion in an oven previously adjusted to 110 °C, leaving for at least 1 h, transferring the container to a desiccator, allowing to cool to room temperature, reweighing the container with the dried test portion, determining the mass of the dried test portion. Annex A gives information on the international standards series for non-metallic blast-cleaning abrasives ISO 11126 and ISO 11127.

标准预览图