ISO 10414-2:2011 石油和天然气工业 钻井液的现场测试 第2部分：油基液

标准编号：ISO 10414-2:2011

中文名称：石油和天然气工业 钻井液的现场测试 第2部分：油基液

英文名称：Petroleum and natural gas industries — Field testing of drilling fluids — Part 2: Oil-based fluids

发布日期：2011-06

标准范围

ISO 10414-2:20 11提供了确定油基钻井液以下特性的标准程序:钻井液密度（泥浆重量）；粘度和凝胶强度；过滤；油、水和固体浓度；碱度、氯化物浓度和钙浓度；电气稳定性；石灰和钙浓度、氯化钙和氯化钠浓度；低重力固体和加重材料浓度。附件提供了可任选用于测定以下物质的附加测试方法或实例:抗剪强度岩屑的油和水浓度；钻井液活性；苯胺点；石灰、盐度和固体浓度；抽样、检验和拒收；钻机现场采样；插条活动；活性硫化物；玻璃器皿、温度计、粘度计、干馏套件杯和钻井液天平的校准和验证；具有固定螺钉固定端盖的渗透率封堵装置；具有螺纹端盖的渗透性封堵装置；弹性体相容性；油基流体含砂量；重量材料下垂的识别和监测；油基钻井液试验报告表。

ISO 10414-2:2011 provides standard procedures for determining the following characteristics of oil-based drilling fluids:

• drilling fluid density (mud weight);
• viscosity and gel strength;
• filtration;
• oil, water and solids concentrations;
• alkalinity, chloride concentration and calcium concentration;
• electrical stability;
• lime and calcium concentrations, calcium chloride and sodium chloride concentrations;
• low-gravity solids and weighting material concentrations.

The annexes provide additional test methods or examples that can optionally be used for the determination of:

• shear strength
• oil and water concentrations from cuttings;
• drilling fluid activity;
• aniline point;
• lime, salinity and solids concentration;
• sampling, inspection and rejection;
• rig-site sampling;
• cuttings activity;
• active sulphides;
• calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluid balances;
• permeability plugging apparatus with set-screw secured end cap;
• permeability plugging apparatus with threaded end cap;
• elastomer compatibility;
• sand content of oil-based fluid;
• identification and monitoring of weight-material sag;
• oil-based drilling fluid test report form.

标准预览图