ISO 11125-2:2018 涂料和有关产品使用前钢衬底的制备 金属喷砂清理磨料的试验方法 第2部分：粒度分布的测定

标准编号：ISO 11125-2:2018

中文名称：涂料和有关产品使用前钢衬底的制备 金属喷砂清理磨料的试验方法 第2部分：粒度分布的测定

英文名称：Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 2: Determination of particle size distribution

发布日期：2018-08

标准范围

本文件规定了通过筛分测定金属喷砂清理磨料粒度分布的试验方法。这是ISO 11125中涉及喷砂清理用金属磨料取样和测试的部分之一。ISO 11124的各个部分包含了金属磨料的类型和要求。ISO 11124和ISO 11125系列已被起草为一套关于金属喷砂清理磨料的连贯国际标准。附件A中给出了两个系列所有部分的信息。

This document specifies a test method for the determination of particle size distribution of metallic blast-cleaning abrasives by sieving.This is one of a number of parts of ISO 11125 dealing with the sampling and testing of metallic abrasives for blast-cleaning.The types of metallic abrasive and requirements on each are contained in the various parts of ISO 11124.The ISO 11124 and ISO 11125 series have been drafted as a coherent set of International Standards on metallic blast-cleaning abrasives. Information on all parts of both series is given in Annex A.

标准预览图