ISO 8139:2018 气动流体动力 1 000千帕（10巴）系列 杆端球形眼的安装尺寸

标准编号：ISO 8139:2018

中文名称：气动流体动力 1 000千帕（10巴）系列 杆端球形眼的安装尺寸

英文名称：Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end spherical eyes

发布日期：2018-09

标准范围

本文件规定了气缸杆端球形孔互换性所需的安装尺寸。杆端球形孔专门设计用于按照ISO 6432和ISO 15552制造的1000 kPa[10 bar[1]]系列气缸，但这并不限制其应用。球形轴承端眼用于气缸活塞杆上，用于在振动旋转和倾斜运动下机械传递气缸力。根据ISO 6432、ISO 15552和ISO 21287的规定，杆端球形孔眼的设计基于气缸内径和压力产生的最大力。[1] 1巴=100千帕=105帕；1帕=1牛顿/平方米。

This document specifies the mounting dimensions required for interchangeability of rod-end spherical eyes of pneumatic cylinders. The rod-end spherical eyes have been designed specifically for use with 1 000 kPa [10 bar[1]] series cylinders manufactured in accordance with ISO 6432 and ISO 15552, but this does not limit their application.The spherical bearing end eyes are used on piston rods of pneumatic cylinders for mechanically transmitting the cylinder force under oscillatory rotational and tilting movements. The design of the rod-end spherical eyes is based on the maximum forces resulting from the specified internal diameter of the cylinders and pressure according to ISO 6432, ISO 15552 and ISO 21287.[1] 1 bar = 100 kPa = 105 Pa; 1 Pa = 1 N/m2.

标准预览图