ISO 12217-1:2002 小型船-稳定性和浮力评定和分类-第1部分：外壳长度超过或等于6M的非航海船

标准编号：ISO 12217-1:2002

中文名称：小型船-稳定性和浮力评定和分类-第1部分：外壳长度超过或等于6M的非航海船

英文名称：Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m

发布日期：2002-04

标准范围

ISO 12217的这一部分规定了评估完整（即未损坏）船只的稳定性和浮力的方法。还包括易受沼泽影响的船只的漂浮特性。使用ISO 12217的这一部分评估稳定性和浮力特性将使船舶能够被分配到适合其设计和最大总载荷的设计类别（A、B、C或D）。ISO 12217的这一部分主要适用于由人力或机械动力推进的船体长度为6米至24米（含24米）的船只。然而，它也可以应用于6米以下的船只，如果它们没有达到ISO 12217-3中规定的期望设计类别，并且它们有甲板并具有符合ISO 11812的快速排水凹槽。ISO 12217的这一部分不包括充气和刚性-ISO 6185覆盖的8米以下的充气船、独木舟、皮艇或其他横梁小于1.1米的船、在动态支撑模式下运行的水翼艇和气垫船以及潜水器。它不包括或评估对拖曳、捕鱼、疏浚或起重作业稳定性的影响，这些应酌情单独考虑。

This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed.The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load.This part of ISO 12217 is principally applicable to boats propelled by human or mechanical power of 6 m up to and including 24 m hull length. However, it may also be applied to boats of under 6 m if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812.This part of ISO 12217 excludes

• inflatable and rigid-inflatable boats up to 8 m covered by ISO 6185,
• canoes, kayaks or other boats with a beam of less than 1,1 m,
• hydrofoils and hovercraft when operating in the dynamically supported mode, and
• submersibles.

It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which should be separately considered if appropriate.

标准预览图