ISO 8419:2003 皮带驱动-窄V-皮带-9N/J,15N/J和25N/J部件

标准编号：ISO 8419:2003

中文名称：皮带驱动-窄V-皮带-9N/J,15N/J和25N/J部件

英文名称：Belt drives — Narrow V-belts — Sections 9N/J, 15N/J and 25N/J (lengths in the effective system)

发布日期：2003-02

标准范围

ISO 8419:2003规定了横截面为9N/J（适用于有效宽度为8.9mm的皮带轮槽）、15N/J（适用于有效宽度为15.2mm的皮带轮槽）和25N/J（适用于有效宽度为25.4mm的皮带轮槽）的窄V带的标准有效长度、有效长度公差、中心距变化，测量有效长度和中心距变化的条件，以及名称和标记。

ISO 8419:2003 specifies, for narrow V-belts of cross-sections 9N/J (for pulley grooves of effective width 8,9 mm), 15N/J (for pulley grooves of effective width 15,2 mm) and 25N/J (for pulley grooves of effective width 25,4 mm), the standard effective lengths, the tolerances on effective lengths, the centre distance variations, the conditions for measuring the effective length and the centre distance variation, and the designation and marking.

标准预览图