ISO 8820-4:2010 道路车辆 熔断器 第4部分：带凹形触点的熔断器（A型）和带螺栓触点的熔断器（B型）及其试验夹具

标准编号：ISO 8820-4:2010

中文名称：道路车辆 熔断器 第4部分：带凹形触点的熔断器（A型）和带螺栓触点的熔断器（B型）及其试验夹具

英文名称：Road vehicles — Fuse-links — Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures

发布日期：2010-12

标准范围

ISO 8820？4:2010规定了道路车辆中使用的带母触点（A型）和螺栓连接触点（B型）的熔断器。它为这些熔断器类型确定了额定电流、试验程序、性能要求和尺寸。ISO 8820？4:2010适用于额定电压为32 V或58 V、额定电流等于或小于140 a、断路能力为1000 a的道路车辆用熔断器。ISO 8820-4:2010旨在与ISO 8820-1和ISO 8820-2结合使用。其条款的编号与ISO 8820-1的编号一致，ISO 8820-1的要求适用，除非根据ISO 8820-4:2010的特殊要求进行了修改。

ISO 8820？4:2010 specifies fuse-links with female contacts (type A) and bolt-in contacts (type B) for use in road vehicles. It establishes, for these fuse-link types, the rated current, test procedures, performance requirements and dimensions.ISO 8820？4:2010 is applicable to fuse-links with a rated voltage of 32 V or 58 V, a current rating equal to or less than 140 A and a breaking capacity of 1 000 A intended for road vehicles.ISO 8820？4:2010 is intended to be used in conjunction with ISO 8820？1 and with ISO 8820？2. The numbering of its clauses corresponds to that of ISO 8820？1 whose requirements are applicable, except where modified by requirements particular to ISO 8820？4:2010.

标准预览图