ISO 24285:2022 建筑设备和工业装置的隔热 泡沫玻璃制品 规范

标准编号：ISO 24285:2022

中文名称：建筑设备和工业装置的隔热 泡沫玻璃制品 规范

英文名称：Thermal insulation for building equipment and industrial installations — Cellular glass products — Specification

发布日期：2022-12

标准范围

本文件规定了工厂制造的蜂窝玻璃产品的要求和试验方法，这些产品用于建筑设备和工业装置的隔热，工作温度范围约为？265？°C到+430？°C。产品以平板、饰面或未饰面板、管段、分段和预制构件的形式制造。本文件描述了产品特性和测试方法、名称代码、标记和标签。本文件不适用于:—？申报热导率大于0.065的产品？W/(m·K)在10？°C；—？建筑结构隔热产品。本文件没有规定产品所需达到的给定性能水平，以证明其在特定应用中的适用性。买方和供应商之间商定的具体要求（如类型、尺寸和形式、法规遵从性和检验要求或认证要求）不在本文件的范围内。

This document specifies the requirements and test methods for factory-made cellular glass products, which are used for thermal insulation of building equipment and industrial installations, with an operating temperature range of approximately？265 °C to +430 °C. The products are manufactured in the form of slabs, faced or unfaced boards, pipe sections, segments and prefabricated ware.

This document describes product characteristics and test methods, designation code, marking and labelling.

This document does not apply to:

—    products with a declared thermal conductivity greater than 0,065 W/(m·K) at 10 °C;

—    products for the insulation of the building structure.

This document does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. Specific requirements agreed between the purchaser and the supplier (e.g. type, dimensions and forms, regulatory compliance and inspection requirements or certification requirements), are outside the scope of this document.

标准预览图